UV Laser Marking Machine
UV laser marking machine - Main Features
● Laser (light source): 355 nm UV laser.
● Air-cooled device, small size, 20,000 hours maintenance-free (theoretical 20,000 hours of service life).
● It requires water cooling, distilled water or pure water.
● The focused spot is extremely small, and the processing heat affected zone is small (cold light), making the material heat-receiving area smaller. Not susceptible to heat deformation, ultra-fine marking, special material marking.
● Low cost of use, better beam quality, high efficiency, low power consumption, more energy saving and environmental protection.
● Can be applied to high-end market, ultra-fine marking environment, cosmetics, pharmaceuticals, LCD liquid crystal, electronic components, communication equipment, food and medicine packaging, glass division, electronic components, metal jewelry marking.
UV Laser Marking Machine - Technical Parameters
-
Model HRC-5WUV Work Area 110*110mm ( Optional ) Laser Power 3W/5W/10W Fiber laser generator Huaray Laser Pulse Frequency 20KHz – 200KHz Laser scanner Sino-Galvo SG7110 Red light dot Yes Power supply Taiwan MW (Meanwell) Wavelength 355±10nm Beam Quality M2 <2 Min Line Width 0.01mm Min Character 0.15mm Marking Speed ≤10000mm/s Marking Depth ≤0.5mm Repeat Precision ±0.01mm Power Supply 110V /220V(±10%)/50Hz/4A Gross Power <500W Laser Module Life 100000h Cooling Style Water Cooling System Composition Laser source, Control System, Industrial Computer,Vibration lens Working Environment Clean and Dust Free Operating Temperature 10℃-35℃ Humidity 5% to 75% (Free of Condensed Water) Power AC220V, 50HZ, 10Amp Stable Voltage Warranty 3 years Dimension (cm) 104*91*151cm Weight (kg) 140kgs
Machine Details
Laser Govanometer scanner
Digital Galvanometer Laser Scanning head with Fast Marking Speed.Fast response ability<0.7ms,can realize high speed marking and high precesion.
Field Lens
We use famous brand to provides precision laser,standard 110x110mm marking area,Optional 175x175mm,200x200mm,300x300mm etc.
Raycus Laser Source
We use Raycus Laser Source,A widely selectivity of operating wave-lengths,ultra-low amplitude noise,high stability and ultra-long lifetime.
EZCAD MARKING SYSTEM
The software has a red light preview function.it can mark barcodes.two-dimensional code,photo,etc.Support file with jpg,png,bmp or dxf,dst etc.It can be fully matched with the flight marking system to provide hundres of automated marking and feeding solutions to fully meet customer requirements.
Power Source
Provide stable direct current,improve laser work performance and service life.
Lifting handle
High quality and stable
Adjust the up and down for different height material marking
Control button
Humanized control system, easy to operate, safe and convenient, dust proof design
Standard Accessories
Sample Photo
Customer Feedback
